*DFRobot 제품은 해외배송 입니다 배송기간 이 약 2주 소요 됩니다 해외배송 제품은 주문 후 취소가 불가능 합니다 교환,반품,기술지원 이 불가능 합니다 구매전 이점 꼭 확인해 주세요*
INTRODUCTION
DFRobot FireBeetle series are low power consumption microcontrollers designed for Internet of Things (IoT) development. This Bluetooth controller combines Bluetooth Low Energy 4.1 with Arduino controller, offering functions similar to the former Bluno series but with lower power consumption. You may also check the Bluetooth microcontroller selection guide to get more information.
FireBeetle BLE 4.1 is compatible with the Bluno series (BLE 4.0) and performs much better. FireBeetle Board-328P with BLE4.1 is equipped with a more stable DIALOG Bluetooth 4.1 chip, supporting a maximum 4Kbyte/s transmission rate and low power consumption (25uA POWER DOWN). It can be directly applied to low power consumption application such as wearable and intelligent tools and so on. It also supports bluetooth 4.1 multiple devices, KISS connections (approach connections) and is compatible with the Bluno series. Its connection can be realized by holding the host BOOT and moving to the target peripheral device.
Arduino GSM Module Poultry Temperature Project
FEATURES
Support Arduino IDE program
Support BLE 4.1 central and peripheral switch
Support Bluetooth serial port data transmit
Support Bluetooth peer to peer (P2P) wireless programming
Support Bluetooth 4.1 multiple device cascade (maximum:4)
Support Arduino Bluetooth library (support multiple Bluetooth connections)
Support low power consumption Bluetooth (standby current: 25uA; enabled interrupt current: 70uA)
Double interruption to wake up:
BLE4.1 awake Atmage328P by D2 (high level awake)
Atmage328P awake BLE4.1 by D3 (low level awake)
Support KISS connection (approach connection)
Support Bluetooth firmware update
Support USB charge
Support lithium battery power supply
Equipped with status LEDs
SPECIFICATION
Processor: ATMEGA328P
Bootloader: Arduino Pro or Pro Mini, ATmega328 (3.3V, 8MHz)
Operating Current: 3.3V
VCC I/O Voltage: 3.7V~5.5V
Lithium Battery Voltage: 3.7V
Support maximum 4Kbyte/s transmission rate (more device, lower rate)
Support low power consumption: 25uA (POWER DOWN); 70uA (enabled interruption)
Support maximum discharge current: 600mA (LDO-3.3V OUTPUT)
Support maximum charge current: 400Ma
Digital Interfaces: 14
Analog Interfaces: 6
SPI: 1
I2C: 1
UART: 1
LED_BUILTIN: D13
Interface Mode: 2.54mm (Pin/Female header), soldering free in default
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.
배송정보
배송 방법 : 택배
배송 지역 : 전국지역
배송 비용 : 3,500원
배송 기간 : 2일 ~ 3일
배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
교환 및 반품정보
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)