상품명 | [DFR0654] 파이어비틀 ESP32-E IoT 모듈 (FireBeetle ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)) / WiFi 및 블루투스가 지원되는 파이어비틀 ESP32-E IoT 모듈 |
---|---|
상품요약정보 | WiFi 및 블루투스가 지원되는 파이어비틀 ESP32-E IoT 모듈입니다 |
판매가 | 22,000원 |
제조사 | DFRobot |
원산지 | 해외 |
적립금 | 220원 (1%) |
상품코드 | P000BQTU |
배송방법 | 택배 |
배송비 | 3,500원 (150,000원 이상 구매 시 무료) |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
[DFR0654] 파이어비틀 ESP32-E IoT 모듈 (FireBeetle ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)) / WiFi 및 블루투스가 지원되는 파이어비틀 ESP32-E IoT 모듈 | 22000 ( 220) | |
총 상품금액(수량) : 0 (0개) |
*DFRobot 제품은 해외배송 입니다
배송기간 이 약 2주 소요 됩니다
해외배송 제품은 주문 후 취소가 불가능 합니다
교환,반품,기술지원 이 불가능 합니다
구매전 이점 꼭 확인해 주세요*
FireBeetle ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips.
It supports WiFi and Bluetooth dual-mode communication and features a small size, ultra-low power consumption, on-board charging circuit, and easy-to-use interface, which can be conveniently used for smart home IoT, industrial IoT applications, wearable devices, and so on. You can easily create your own IoT smart home system when connecting it with an IoT platform like IFTTT.
FireBeetle ESP32-E supports Arduino programming and will support Scratch graphical programming and MicroPython programming very soon. We provide you with detailed online tutorials and application cases, and there are thousands of sensors with welding-free Gravity interface and actuators to help you get started easily. Besides, the stamp hole design makes it able to be easily embedded in your PCB, greatly saving your costs and time to build and test prototype.
Figure 2.Pinout
What's the difference between FireBeetle ESP32-E and FireBeetle ESP32?
-ESP32-E uses a data encryption chip to protect program security
-ESP32-E is equipped with a DFRobot GDI(General Display Interface) to connect screens like DFR0664/DFR0649/DFR0665/DFR0669
-Software are ecologically compatible with both ESP32 and ESP32-E, except for minor changes in pin mapping
-ESP32-E cannot use an expansion board for ESP32 V4.0
SKU | ||
Microcontroller | ESP32-D | ESP32-E |
Power Supply Interface | Micro USB | USB-C |
USB to UART | CH340C | CH340K |
Operating Voltage (V) | 3.3V | 3.3V |
Flash | 16MB | 4MB |
SRAM (KB) | 520k | 520k |
Analog Pins | 5 | 5 |
Digital Pins | 10 | 10 |
UART | 1 | 1 |
I2C | 1 | 1 |
SPI | 1 | 1 |
Side Key | × | √ |
RGB_LED | × | √ |
DisplayPort (GDI) | × | √ |
Stamp Holes | × | √ |
Fool-proof | × | √ |
Silkscreen | underside | two-sided |
Mount Hole Size (mm) | 3.5 | 2 |
Dimension (mm) | 29*58 | 25.4*60 |
Weight (g) | 24 g | 23g |
Price ($) | $6.9 | $6.9 |
Espressif has recently released one wafer-level change on ESP32 Series of products: ESP32-E. Below are the main design changes in ESP32-E Series of chips:
1. PSRAM Cache Bug Fix: Fixed “When the CPU accesses the external SRAM in a certain sequence, read & write errors can occur”.
2. Fixed “When each CPU reads certain different address spaces simultaneously, a read error can occur.”
3. Optimized 32.768 KHz crystal oscillator stability, the issue was reported by client that there is a low probability that under ESP32-D hardware, the 32.768 KHz crystal oscillator couldn’t start properly.
4. Fixed Fault injection issues regarding secure boot and flash encryption are fixed.
5. Improvement: Changed the minimum baud rate supported by the CAN module from 25 kHz to 12.5 kHz.
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.