상품명 | Arduino Mega ADK (R3)/아두이노 메가 ADK/이태리 정품/ATmega2560 |
---|---|
상품요약정보 | Arduino ADK Mega 보드는 USB host controller와 Arduino Mega2560을 하나의 보드안에 넣어 Google ADK와 호환되도록 만듬 |
판매가 | 77,000원 |
제조사 | Arduino |
원산지 | 이탈리아 |
적립금 | 770원 (1%) |
상품코드 | P00000ZL |
배송방법 | 택배 |
배송비 | 3,500원 (150,000원 이상 구매 시 무료) |
수량 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
Arduino Mega ADK (R3)/아두이노 메가 ADK/이태리 정품/ATmega2560 | 77000 ( 770) | |
총 상품금액(수량) : 0 (0개) |
Arduino Mega ADK Rev3 Italy 정품
OVERVIEW
The Arduino MEGA ADK is a microcontroller board based on the ATmega2560.
It has a USB host interface to connect with Android based phones, based on the MAX3421e IC.
It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs,
4 UARTs(hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack,
an ICSP header, and a reset button.
The MEGA ADK is based on the Mega 2560.
Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter.
Revision 2 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground,
making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new
pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the
voltage provided from the board. In future, shields will be compatible both with the
board that use the AVR, which operate with 5V and with the Arduino Due that operate
with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit.
For information on using the board with the Android OS, see:
You can find your board warranty information here.
Getting Started
You can find in the Getting Started section all the information you need to configure your
board, use the Arduino Software (IDE), and start tinker with coding and electronics.
Need Help?
On Projects on the Arduino Forum
On the Product itself through our Customer Support
TECH SPECS
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
USB Host Chip: MAX3421E
Length: 101.52 mm
Width: 53.3 mm
Weight: 36 g
DOCUMENTATION
https://store.arduino.cc/usa/arduino-mega-adk-rev3
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.